BallZ Posted February 26, 2014 Share Posted February 26, 2014 Not sure of the year of the seats, with that being said the measurements work width wise, but my hold up is the front bracket welded to the floor. Would I be ok cutting the welded front floor mounting piece out? or do I risk other problem's by doing this? Thank for the insight tried searching for awhile but came up with way to many results...Ryan Quote Link to comment Share on other sites More sharing options...
Pharaohabq Posted February 28, 2014 Share Posted February 28, 2014 I was looking at the 2010 Eclipse seats. they look really similar to the stock S30 seats but are upgraded a bit. I almost bought some, but found a set of 350Z seats in mint so I'm going with those... You should be fine cutting the bracket, but you may need to weld to repair and mount it in an S30. Quote Link to comment Share on other sites More sharing options...
BallZ Posted February 28, 2014 Author Share Posted February 28, 2014 Just to clarify its the front welded piece that goes over to the trans tunnel. Thanks for the reply Quote Link to comment Share on other sites More sharing options...
Pharaohabq Posted March 3, 2014 Share Posted March 3, 2014 some people have hammered the trans tunnel to make them fit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.