Jump to content
HybridZ

Looking for feedback on LS 240z swap


Recommended Posts

Copy the URL then use the image tool  HERE  and paste the URL address you get after resizing the pic. I resized this pic, then did just what I wrote above using the image tool.

 

CLICK 

 

I resized your pic from 1024 x 768 to 300 x 225 just to show you.  

3f66.jpg                        

Link to comment
Share on other sites

I've been running an LS1/T56 combo in my 280Z for over 10 years now. It has a 3.70:1 R200 LSD. I'm also running sticky Dunlop Direzza 225/50-16 tires. The car has not been raced a lot but I routinely get on it in my daily driving. I detonated an original 200,000 mile u-joint on one of my half-shafts about 5 years ago. The bad news was that it took out my e-brake cable and my brake caliper on that side when it went. E-brake cables are expensive to replace if you can't find a used one.

That said, I think you are on the right track. Put the car together as you are planning and drive it. If you "feel the need for speed" then consider an LSD R200 with CV's or an R230 for the back. Either will do the job.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...