edwin Posted April 17, 2015 Share Posted April 17, 2015 I finally got my MS3-pro and slowly reading and installing it. I just figured out that I need a Igniter for the Ford coils I have. These coils do not have a build in igniter. (only 2 wires out of it) DIYautotune offers QuadSpark but they are 90 bucks each and I have to buy 2. I've seen menbers mention using Nissan 6 channel igniter. Is this a better option and how is it wired up? Can anyone recommed an igniter? and direct me to a wiring diagram for it. Ford COPMS3-pro82 L28ET distributer running the DIY trigger wheel thanks Quote Link to comment Share on other sites More sharing options...
loy Posted April 17, 2015 Share Posted April 17, 2015 (edited) You can order transistors and wire them up inside mega squirt. http://www.diyautotune.com/catalog/bosch-bip373-coil-driver-mod-kit-p-230.html https://www.fairchildsemi.com/datasheets/IS/ISL9V3040D_F085.pdf http://www.digikey.com/product-detail/en/ISL9V3040P3/ISL9V3040P3-ND/820825 Edited April 17, 2015 by loy Quote Link to comment Share on other sites More sharing options...
winstonusmc Posted April 17, 2015 Share Posted April 17, 2015 There are Nissan 6 channel igniters available in 300zx, Maximas, and Infiniti J and I 30. Quote Link to comment Share on other sites More sharing options...
winstonusmc Posted April 17, 2015 Share Posted April 17, 2015 I used the Skyline igniter from the RB25 Quote Link to comment Share on other sites More sharing options...
edwin Posted April 18, 2015 Author Share Posted April 18, 2015 Thanks Guys, I plan to go with a Nissan igniter can anyone draw me up a wiring diagram for it? Quote Link to comment Share on other sites More sharing options...
loy Posted April 18, 2015 Share Posted April 18, 2015 Depends on the igniter you get Here's one for the rb. http://wiki.r31skylineclub.com/images/6/6a/Pinouts_R33_rb25_wiring_diagram.gif If you look in the bottom left hand corner you should be able to figure it out. Quote Link to comment Share on other sites More sharing options...
edwin Posted April 20, 2015 Author Share Posted April 20, 2015 (edited) reading blue print wiring diagram is kind of hard for me, so i made my own for better visual ref. Please take a look and I'm hoping you can connect the dots. Edited April 21, 2015 by edwin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.