Logoleaf Posted July 16, 2015 Share Posted July 16, 2015 Can anyone please linked me some diagram of how to install the boost gauge? I know it is a simple job but would like to make sure i did it right at first start. I have an Autometter boost gauge. Where to hook up the hose to? Thanks everyone! Quote Link to comment Share on other sites More sharing options...
wolfalp1592 Posted July 16, 2015 Share Posted July 16, 2015 The factory boost gets a feed from the intake manifold, there is a small black plastic device that has the vacum line from the intake. Quote Link to comment Share on other sites More sharing options...
Careless Posted July 20, 2015 Share Posted July 20, 2015 preferably off the intake manifold (after the throttle body) unshared from any sort of valve that diverts vacuum to another device. It will not matter much as long as it's tapped in before the vacuum device/valve, but having it run to the manifold on its own line is ideal. Quote Link to comment Share on other sites More sharing options...
mizle Posted December 30, 2015 Share Posted December 30, 2015 Like already said, running off the intake manifold is a good spot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.