Jump to content
HybridZ

Fuel pressure slow to rise on turbo motor??? help :)


Recommended Posts

Hey guys whatsup, i forgot to mention this. More progress on the z. I pressurized my fuel system to go leak hunting last week. I dont have the car here, but need some advice.

 

I tested the fuel pressure at 50psi... my fuel rail leaks (very slowly) I can fix this without much trouble.

 

Here is my dilemma, it takes like 20 seconds for the fuel pressure to hit the 50psi mark on my gauge. Is this too long?

 

Here are a couple causes i have considered if this is abnormal.

 

A) Low battery voltage (dont think this is it, my battery seemed to have alot of juice).

 

B) Not enough fuel in the tank (I tested it on two gallons of fuel in the stock FI gas tank).

 

C) Could the leaky rail have caused pressure to build too slowly?

 

Alright guys, i want to know what to look for next time i get home and fix this. Any ideas out there? Or is this situation normal?

 

Just for background, i have .5 inch hard line to the engine compartment. SX fuel pump and regulator. Fram fuel fiter (like scotties). Nothing else super special. I could hear the gas going into the tank through the return line which is good. My fuel pump is also mounted level with the output lline on the fuel tank, so its not pulling fuel up hill.

 

Thanks guys!- Evan

 

PS... it was truely a thrill to see the fuel pressure rise with so few problems! I was expecting the thing to be like a sprinkler. *progress is a beautiful thing*

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...