RaceDriver Posted May 27, 2016 Share Posted May 27, 2016 Improved Racing's new billet crank scraper kits and windage trays will be available next week. These kits are a big improvement from our 1st generation scrapers. We have a lot more applications, and they are completely bolt-on for most common setups, including 4" strokers. If you are building a stroker, you no longer have to worry about modifying a factory windage tray to make it fit, bending the pickup tube, etc. You can just bolt one of these kits right up, make up to 2% more horsepower at the wheels, and reduce oil starvation. Features and Benefits Guaranteed to increase horsepower by up to 2% at the wheels Reduces oil starvation and aeration 100% bolt-on installation Windage tray is secured with locking, vibration-resistant self-clinching nuts Includes upgraded main cap stud lock nuts Lighter and stronger than the factory windage tray Lifetime Warranty Made in the USA Pre-order a scraper now and get a $50 discount! The discounts are already reflected on the product pages. This offer expires as soon as we get the new scrapers in, so don't wait! Because there are a lot of part numbers now and it can be a little confusing, we put together an application table with a drop down filter that allows you to filter the parts by vehicle / oil pan, main stud type, stroke, etc. Here's the application chart: http://www.improvedracing.com/tech/crank-scraper-application-list.php The application chart can also be found in the product listings. If you don't see your application, please contact us so we can figure out what you need. We will be adding more scrapers soon, starting with factory 3.622" stroke applications with aftermarket rods. If there are any other requests, let us know. All available scrapers are listed here: http://www.improvedracing.com/oiling-system/crank-scrapers-windage-trays-c-3_50.html Attached are a couple renderings of some of the new scrapers and windage trays, as well as a couple of quick shots of a partially completed scraper. Quote Link to comment Share on other sites More sharing options...
260DET Posted May 27, 2016 Share Posted May 27, 2016 Scraper and windage tray for a LS3? I got one of your original scrapers which was rubbish but these look good, you offered me a huge discount on this new model so a big plus for your after sales service. PM special price to Richard from Australia if you like, cheers. Quote Link to comment Share on other sites More sharing options...
nathaninwa Posted May 27, 2016 Share Posted May 27, 2016 This is great news Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.