chiefmd Posted July 7, 2016 Share Posted July 7, 2016 Just finished the wiper upgrade. It functions and parks as it should with this exception. Wiper at the bottom of the windshield I turn them on, the wipers come up (as they should)but on the down stroke it runs past the bottom of the w/s onto the cowl, comes up I turn off the switch and they park at the bottom where they should. In order to eliminate the over runon the bottom I have to position the wiper arm about 4" up from the bottom. Any suggestions. Could it be that I cut the motor arm threads at the incorrect clock position? Quote Link to comment Share on other sites More sharing options...
Grog Posted July 22, 2016 Share Posted July 22, 2016 Post some pictures so we can see. Quote Link to comment Share on other sites More sharing options...
chiefmd Posted July 23, 2016 Author Share Posted July 23, 2016 Issue has been resolved. It was what I thought. I had cut the shaft at the wrong angle. Went back to the JY and pulled another. This time I parked it and then made the cuts. Works great. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.