JelmerPatrol Posted September 14, 2016 Share Posted September 14, 2016 I'm after a bigger sway bar for my 83 Laurel C31. It has about the same suspension as all RWD Nissan's from the '70's, '80's and early '90's but no aftermarket support because they are very rare in the whole world. I fitted S12 strut rod bushings and S130 sway bar links so I think a lot of parts would fit from different Nissans. Can you guys check and see if a sway bar from a S30 or S130 or Z31 would fit? Or anything you have laying around? Mine is only 18mm thick.... Quote Link to comment Share on other sites More sharing options...
JelmerPatrol Posted September 16, 2016 Author Share Posted September 16, 2016 Nobody that can take measuments? Quote Link to comment Share on other sites More sharing options...
74_5.0L_Z Posted September 16, 2016 Share Posted September 16, 2016 The center to center distance for the mounting bushings on the S30 is 700 mm, so the S30 sway bars are likely too narrow for your application. I would look into a sway bar for an older Mustang. I used to play with the older Mustangs (69-70). They had a similar shape and were wider than the S30 sway bars. Quote Link to comment Share on other sites More sharing options...
KAZU Posted September 17, 2016 Share Posted September 17, 2016 (edited) I measured an aftermarket bar of S14 silvia. 980 mm, 730 mm, and 210 mm. I measured the arm dimension as offset from the bushing axis. The other one is modified stock bar of 240z. I suppose BMW E46 bar is slightly larger than S14's in any direction. Edited September 17, 2016 by KAZU Quote Link to comment Share on other sites More sharing options...
JelmerPatrol Posted September 17, 2016 Author Share Posted September 17, 2016 Thanks a lot guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.