lawbringer831 Posted December 5, 2016 Share Posted December 5, 2016 Any body try a bare bones wiring just start,alternator? basically don't want anything but to start the car and charge battery Quote Link to comment Share on other sites More sharing options...
NewZed Posted December 5, 2016 Share Posted December 5, 2016 yes its easy just s and l and the solenoid wire and the charge wire and the battery cables. you can ewven use a screwdriver if you want to avoid the solenoid wire Quote Link to comment Share on other sites More sharing options...
beermanpete Posted December 9, 2016 Share Posted December 9, 2016 Sure. I did a minimal rewire on our car for track use. What is your intended use for the car? Quote Link to comment Share on other sites More sharing options...
Driftinrican Posted January 12, 2017 Share Posted January 12, 2017 You can do something like that just to get it to run but I wouldn't recommend it. At the very least you want a few wires set to operate and illuminate your basic gauges. For example you need a volt meter, coolant temp, rpm, igniter, and fuel pump. For your basic Preformance needs. Deleting the wires for the HVAC, exterior lights, horn, and radio can all be deleted without affecting the engine. Quote Link to comment Share on other sites More sharing options...
lawbringer831 Posted January 22, 2017 Author Share Posted January 22, 2017 I went with rat rod 10 circuit kit from Ron fransis the barebonez it called haven't had time to put it in will post when I do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.