clarkspeed Posted August 9, 2017 Share Posted August 9, 2017 After looking at all the variations on the net, I decided to go my own route. Mostly 2 and 2.5" square tubing. Acme thread adjusters to center the weight. Didn't want the greased pipe in pipe for rotation so sourced spindle pins, hubs, bearings, and 8" wheels from etrailer for about $100. I think I have about $250 in it total and the thing practically paid for itself the first time I used it. I can't believe I actually considered trying to work underneath this thing. It also rolls around on the floor easy. As you can see, the car does not weigh over 1/2 ton, but I could upgrade it to handle more weight if needed with a different wheel/beam set up. https://www.facebook.com/262575520591481/photos/pcb.803277733187921/803277706521257/?type=3&theater https://www.facebook.com/262575520591481/videos/801158750066486/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.