M_Motorsports Posted December 3, 2017 Share Posted December 3, 2017 While working on my steering rack and oil pan replacement I removed the oil pump cover and the oil pump driveshaft dropped out. What is needed to correctly replace the driveshaft in its correct position? Quote Link to comment Share on other sites More sharing options...
NewZed Posted December 3, 2017 Share Posted December 3, 2017 Follow the instructions in the Factory Service Manual. Engine Mechanical and Engine Lubrication chapters both have them. Quote Link to comment Share on other sites More sharing options...
M_Motorsports Posted December 3, 2017 Author Share Posted December 3, 2017 So it would not be as simple as to insert the driveshaft and bolt it up? Quote Link to comment Share on other sites More sharing options...
NewZed Posted December 3, 2017 Share Posted December 3, 2017 I think that I misread your post. I was thinking that you dropped the whole pump and the distributor shaft fell out. You should be able to just put the pump back together without worrying about orientation. Turn the rotor until is drops in to place. Still doesn't hurt to read the FSM to understand how things work. Quote Link to comment Share on other sites More sharing options...
M_Motorsports Posted December 3, 2017 Author Share Posted December 3, 2017 Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.