Grandpa 1 Posted December 26, 2017 Share Posted December 26, 2017 Need a little help with the signal wire. I see you need to add a resistor but where does it go from there? The harness is from speedway motors. I have the main wire to the starter along with the positive battery cable. Sorry if this has been asked before but I can’t find it. thanks Quote Link to comment Share on other sites More sharing options...
SH4DY Posted December 26, 2017 Share Posted December 26, 2017 (edited) https://ls1tech.com/forums/conversions-hybrids/1875107-c6-corvette-alternator-wiring.html#post19706842 Edited December 26, 2017 by SH4DY Quote Link to comment Share on other sites More sharing options...
northwoodz Posted December 26, 2017 Share Posted December 26, 2017 I think you can rig up a dummy light instead of a resistor if you wanted. As long as its an incandescent one and not led, it would have enough resistance and would lite up whenever the alt wasn't charging. Not sure if the factory S30 one would work or not. Quote Link to comment Share on other sites More sharing options...
Grandpa 1 Posted December 26, 2017 Author Share Posted December 26, 2017 Looks like that wire is just to show the alternator is charging. I could the solder in a resistor and connect that to a new dash light. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.