Jump to content
HybridZ

Recommended Posts

Hi all, I’m new to the Z31 and would like some sort of direction in swapping but I have little experience. I have an 86 non turbo but looking to swap to a VG30ET. I was doing some research and seen that I’d need the crossmember, intercooler setup, and turbo ecu. Would there be anything else I need in doing the swap? I would really like to do the swap but don’t want to do anything that I couldn’t handle. 

 

Also was reading that many do a turbo conversion on their N/A. Opinions?

 

Thanks for any input in advance!

Edited by bcharmane
Link to post
Share on other sites

Turbo manifold and injectors too.. I had read that someone just plugged the turbo Ecu into the NA harness and it was fine. I’ve been going through an 88 turbo harness and comparing it to the 87 NA harness I had.  The Body to EFI harness plugs are different. Its possible they didn’t care about what that ran.  The 3 ECU plug pin outs may be the same. 

 

Intercoolers never came on US cars. The rb20 Japan models had them.

Link to post
Share on other sites
  • 10 months later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...