skyptrl Posted September 3, 2018 Share Posted September 3, 2018 I replaced wiper motor on 77 280, how do I set the wiper linkage so wipers stop at park position? Quote Link to comment Share on other sites More sharing options...
grannyknot Posted September 3, 2018 Share Posted September 3, 2018 With the linkage not attached and new motor plugged in turn the wiper switch on for a few seconds then turn it off, the motor will stop in the park position. With out turning the motor from where it is attach the linkage so that it is in the park position as well, once motor and linkage are installed and working attach you wiper blades also in the park position. Test it out with your blades raised or with water on the windshield so you are not taxing the motor. While you have the linkage out make sure you overhaul the spindles that move the wiper blades, they can get very stiff with corrosion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.