walkerbk Posted March 21, 2019 Share Posted March 21, 2019 I had previously swapped an 5.3 into my z. Well as all things go, it's time to improve it and get a bigger engine. With that, I'm rewiring the car front to back (already pulled a lot of it so there is no changing my mind). I have seen somewhere on here where people ran the wiring through the fender to hide it but I cant for the life of me find it again. I am going to use mil connectors to make the engine removable with the harness and then directly route the body harness through the firewall where needed to best hide it. My question is where did yall put wires through the firewall to best hide them and where do you go into the fender? Quote Link to comment Share on other sites More sharing options...
rabrooks Posted March 27, 2019 Share Posted March 27, 2019 Subscribed for reference 😁 Quote Link to comment Share on other sites More sharing options...
unterbergamotten3 Posted March 27, 2019 Share Posted March 27, 2019 out the A pillar and along the fender aprons Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.