5 Star Rising Posted May 21, 2019 Share Posted May 21, 2019 (edited) Sold a car for part cash part trade for a set of Italian triple webers with linkage and a Cannon intake. They will be going on my series 1... I don't know alot about these carbs but I know alot of guys use these. I asked the guy about the history of them and he said they came off a running car, I asked if there was anything wrong with them and he said rebuild kits are cheap lol, so either there is something wrong with them or he honestly thinks they are good and maybe they are.. I'm guessing it's a little more than just bolting them up and seeing if they are good to go or not. Would you guys rebuild them first and not mess around putting them on the car till then? Also is there info on how to properly tune and set them up? I have a Air flow meter that I use for my SUs.. And lastly, what do you guys use for air filters on these things, they didnt come with any. I like the chrome air horns but don't know how they would keep from sucking in bad shit into the motor, do the little screens actually work vs like a k&n set up? Thanks Edited May 22, 2019 by 5 Star Rising Quote Link to comment Share on other sites More sharing options...
munters Posted May 21, 2019 Share Posted May 21, 2019 Check if all are the same type. Open them and clean everything and while you are on it write everything down you have in there. Helping will be easier when you know what jets and tubes are installed. Quote Link to comment Share on other sites More sharing options...
5 Star Rising Posted May 22, 2019 Author Share Posted May 22, 2019 4 hours ago, munters said: Check if all are the same type. Open them and clean everything and while you are on it write everything down you have in there. Helping will be easier when you know what jets and tubes are installed. I have rebuilt my round top SUs, but never opened up webers, I'm a little intimidated that springs and ball bearings might come flying out Haha j/k. Is there any good info in tearing these down? And are the jets and tubes numbered? Thanks Quote Link to comment Share on other sites More sharing options...
5 Star Rising Posted May 23, 2019 Author Share Posted May 23, 2019 Found a few vids on YouTube about these little bastards. One said you needed a different throttle rod for the linkage to work with the stock components. Quote Link to comment Share on other sites More sharing options...
munters Posted May 23, 2019 Share Posted May 23, 2019 Take one apart to look at the others when you have troubles. There are not many parts.. . To me it looks you have everything needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.