A to Z Posted August 18, 2024 Share Posted August 18, 2024 I decided to tackle another little project I had to do today. I bought some chrome decal material a while back, and I decided to finish the innder door panels where the "chrome" stripe is supposed to be. My original stripe's chrome was long gone, and when I had finished the panel I intially wasn't going to try and do the chrome, but having the decal material here, I decided to give it a go. I measured the length and cut it so it was a bit wider than needed, and then got some 3M aerosol adhesive. I then installed and used a sharp razor blade to cut them to the right size, then used the aerosol adhesive on them where additional "stick" was needed. Once done, I carefully used a rag with somne denatured alcohol on it to wipe off any glue residue. Quote Link to comment Share on other sites More sharing options...
Dkapp Posted 14 hours ago Share Posted 14 hours ago Where did you locate the Chrome “decal” material? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.