A to Z Posted December 4 Share Posted December 4 I decided one of the very last things I will probably do with my 240Z is replace the center dash area with a custom plate with switches and gauges. I started by getting the plate from Skillard, and made sure to spend the extra 10 bucks for the satin powder coating. Nice piece. I then went about taking measurements and figuring our just exactly how I wanted it to look, what I needed it to have and what would make it look cool. Earlier I had added 5 switches to the fuse box cover plate, and now that I am going to do this, I will move those wires up to switches, and eliminate those switches in the cover. Since that plate will now have holes, I will have to decide whether I wish to replace it with another stock piece, or cut a piece of aluminum to fit. Do any of you know someone who makes that plate? I asked Ben at Skillard and he doesn't. Anyway, I decided to go with the old fashioned toggle switches, and then in the space above it, I am going to add two 2 1/16" gauges I found online from "MaxTow".....apparently they are used by truck guys, but of all the gauges I found, they were the nicest looking .....in my mind at least. I spent some time tonight drawing out all the holes needing to be drilled on the back of the piece, and I am hoping that by going from the back out, the powdercoating will survive. I am also attaching pics of the gauges and switches I have ordered.....and another pic of the triple gauges I already bought from MilkFab....still waiting on my Knock sensor gauge to come in. Comments welcome. Cheers! 1 Quote Link to comment Share on other sites More sharing options...
FastFloridian Posted December 4 Share Posted December 4 Look forward to see how it comes out. I’ll be tackling this project on my car in a few months, hoping for some good ideas. Quote Link to comment Share on other sites More sharing options...
A to Z Posted December 5 Author Share Posted December 5 Thanks! I will do my best. Quote Link to comment Share on other sites More sharing options...
A to Z Posted December 5 Author Share Posted December 5 (edited) 12-04-02024 Dash Center Plate Project Update: My switches came in already, So I went ahead and drilled out all the holes and mounted the switches in. I like the look with the waterproof covers that screw on. The big holes will need a little adjustment here and there but coming along pretty good! Pics follow Edited December 5 by A to Z Jesus is the living Son of God 1 Quote Link to comment Share on other sites More sharing options...
A to Z Posted 11 hours ago Author Share Posted 11 hours ago (edited) 12-11-02024 Dash Center Plate Project Update: My 2 upper gauges I bought from Mx Tow arrived, and I got them in the plate and tightened down. See pic. Edited 10 hours ago by A to Z Jesus is the living Son of God Quote Link to comment Share on other sites More sharing options...
A to Z Posted 10 hours ago Author Share Posted 10 hours ago 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.