BRAD D Posted July 6, 2003 Share Posted July 6, 2003 My car is running, and the clutch is not fully engaging. I am using a RB25 clutch slave, and an OS twin plate clutch hooked up to th e stock clutch master cylinder. What master cylinder can i swap in to give my clutch slave more travel? My slave cylinder says 3/4 on the side of it... Quote Link to comment Share on other sites More sharing options...
Mike Mileski Posted July 7, 2003 Share Posted July 7, 2003 With a stock Chevy bellhousing for a T-5, JTR recommends a 7/8"Tilton, which I am using, but I think that's the bare minimum. They make a 15/16" and a 1" and I think I'll switch to a 15/16" down the road sometime, just to make sure I have enough travel. Mike Mileski Tucson, AZ Quote Link to comment Share on other sites More sharing options...
BRAD D Posted July 7, 2003 Author Share Posted July 7, 2003 I ordered a 7/8" tilton I hope it will work I just need around a 1/4" more travle on the slave Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.