fl327 Posted July 20, 2003 Share Posted July 20, 2003 http://www.clutchcityonline.com/spec/nissan.htm 319.00 for a clutch rated at 515lbs with the 240mm flywheel, man thats what im talking about!!! and free shipping!! just followed a link from ebay, when the companies post a million and one products like that i usually try to see if i can get them cheaper from the website. im pretty sure i wont make 500lb feet, but with the turbo im using it is a definite possibility. anyone use these clutches, im pretty sure its a good product and the price definitely works for me!!! ever since i ran my car in the 1/4 the first time, about three months ago, i knew it wouldnt hold up to me for long, well i took it back to the track with an intercooler and more boost, i did manage good times, but they got worse with every run, with lower shift points and it got so bad to the point at the 1000ft mark i got off the gas entirely. i street raced it a few more times after that, and now it wont take any kind of wot load without crying. Quote Link to comment Share on other sites More sharing options...
Guest ON3GO Posted July 20, 2003 Share Posted July 20, 2003 SPEC clutches are great. alot of 240sx guys use them on there SR swaps.. only prob with them is its a very soft pedal feel. Quote Link to comment Share on other sites More sharing options...
jgkurz Posted July 25, 2003 Share Posted July 25, 2003 I am installing the same Spec clutch in my Z. Unfortunately they require a 400 mile break-in period before you can put any real power to it. Oh well. I'll play be the rules if it means it won't slip under 20 PSI of boost. Quote Link to comment Share on other sites More sharing options...
speeder Posted July 25, 2003 Share Posted July 25, 2003 I'd like to know exactly what model you guys get, and how it works for you. I'm looking for an alternative to my gonzo flywheel - eating 6-puck ceramic- something more user friendly, yet strong. Quote Link to comment Share on other sites More sharing options...
jgkurz Posted July 25, 2003 Share Posted July 25, 2003 The Spec model I bought is a SN323. It has a sprung 6-puck disk. I'm going to be using an Assco 240mm aluminum flywheel. The whole setup should be running in late August. http://www.speclutches.com Quote Link to comment Share on other sites More sharing options...
yo2001 Posted July 25, 2003 Share Posted July 25, 2003 I chose ACT over SPEC. Same price, about same rating. 6 pucks are little over 500ft/lb. I got street disk with HD pressure plate rated at 400ft/lb. (6 puck isn't my taste for a street car) It's heavy but it holds. SPEC is a local shop for me. I've seen both failure and success. If the clutch disk is made at Performance friction Material, It'll be a nice unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.