Jump to content
HybridZ

ignition update...see below


Arif

Recommended Posts

Car still won't start. All the electrical accesories are working (radio, wipers, lights, etc) but still not getting anything on the ignition side. I did get a spark when I tapped the starter with a screwdriver but nothing happens when I turn the key. I hear a clicking noise from the passenger side footwell. Everything works except the car won't start. I even retraced my steps when I installed the slave cylinder. Everything seems to be hooked up right. Any other ideas?

Link to comment
Share on other sites

Your clicking noise sounds an awful lot like the starter soleniod trying to do it's job, but not succeeding. When the solenoid contacts get bad enough, or the voltage low enough (dead battery or poor battery post contact) the clicking is all you get. Do you have a good ground strap between the engine and the body?

 

A free quick battery/connectivity test is to have a friend sit in the car and try and start it while the headlights are on. If the lights go out or way dim when the starter is energized, you have inadequate battery voltage under load. (See above).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...