Guest datsun280zmike Posted February 10, 2004 Share Posted February 10, 2004 would anyone recommend me using wheel spacers and extended studs to make my stock wheels be flush with my ZG flares....does anyone know what width spacers i should use? Quote Link to comment Share on other sites More sharing options...
johnc Posted February 10, 2004 Share Posted February 10, 2004 As the guy in the other topic figured out, use washers on the lugs until you get the wheel where you want it then measure the washer stack and you'll have the thickness of the spacer. Quote Link to comment Share on other sites More sharing options...
slownrusty Posted February 11, 2004 Share Posted February 11, 2004 Yup! Thats what I did! Yasin Quote Link to comment Share on other sites More sharing options...
Modern Motorsports Ltd Posted February 12, 2004 Share Posted February 12, 2004 would anyone recommend me using wheel spacers and extended studs to make my stock wheels be flush with my ZG flares....does anyone know what width spacers i should use? A fine solution IF your studs are fresh/good pieces and your spacers are made to fit your hubs hubcentric so they're snug/proper fit. Spacers must have centrebore and bolt pattern VERY concentric about the centre axis. We do these regularly/Nissan Quest studs are the easiest install/for longer studs and greater strength we'll bore out OEM hubs for ARP studs. Drop us a line if you have any questions or want a set of custom spacers done for yourself. Quote Link to comment Share on other sites More sharing options...
Guest datsun280zmike Posted February 13, 2004 Share Posted February 13, 2004 thanks i appreciate the help guys...i was also thinking about the honda adapters Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.