Guest battg8r Posted February 10, 2004 Share Posted February 10, 2004 I recently completed the 240sx rear brake conversion only to find out my original '72 240 steel wheels don't fit. They hit the caliper. I thought I had the problem solved with a set of 4-lug 300zx aluminum wheels, but the offset is too much and the tires are rubbing the struts. How much of a spacer do I need to make it fit? I'm going to shim it out with some S/S washers to see what gap is needed and if I need to use some extended lugs. Any advice will be appreciated. Quote Link to comment Share on other sites More sharing options...
johnc Posted February 10, 2004 Share Posted February 10, 2004 Sounds like you have it figured out. Quote Link to comment Share on other sites More sharing options...
Guest battg8r Posted February 10, 2004 Share Posted February 10, 2004 I hope so, everytime I get one thing taken care of something else comes up. Quote Link to comment Share on other sites More sharing options...
Tim240z Posted February 10, 2004 Share Posted February 10, 2004 I hope so, everytime I get one thing taken care of something else comes up. Welcome to the world of project cars Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.