Jump to content
HybridZ

centerline wheel ???


Recommended Posts

I have a set of 16 x 8 s all around and the rears clear my COILOVERS by about 1/4 inch, also with 5" back space. Best thing to do is to put a straight edge on your hub, measure 11 inches up from center and then see how much room you have to your strut. With 215s on that 8" rim, the rim will be the widest point, not the tire. I am running 245/45 -16s all around.

 

Tim

Link to comment
Share on other sites

nope and nope.

But to run the 5" Back Spacing, you will need coilovers. Without the 5" backspacing, you would probable need to roll the fenders.

One caveat, though....I have ~12inch rotors on the front with 4 pot calipers. The rotor hats slip over the lugs (not bolted to the back of the hub like OEM). This adds ~1/2" to the hub (like a 1/2" spacer, I suppose). There is still enough space inside if I didn't have the spacer.

Link to comment
Share on other sites

I'm running the same setup as Tim, and there is no problem with tire to coilover clearance (you definitely need coilovers with a 5" BS).

 

I think I've got my Z set a bit lower than Tim, because I did have to trim about 1/4" off the horizontal rear fender lip. No front modifications needed.

 

Pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...