BillZ260 Posted April 30, 2004 Share Posted April 30, 2004 I need to tune up the register in my drivers side door. I have never messed with one before. Currently you have to pull up on the rear of the window to smoothly roll it up. Any tips or suggestions would be great. I also need to replace the inner felting, is there a good supply source or are they all about the same. Seen some on ebay, guess I will comparison shop. thanks Quote Link to comment Share on other sites More sharing options...
Guest 305240 Posted May 4, 2004 Share Posted May 4, 2004 After you clean all the dirt and grime out of the regulator, I would use a white lithium grease on the gears and joints. Victoria British or MSA should be a good sourse for the rest of your needs. Quote Link to comment Share on other sites More sharing options...
BillZ260 Posted May 17, 2004 Author Share Posted May 17, 2004 bump is there anything that get's loosened up or that I should look for? I am dealing with some other issues now but when I get to the door, I would like to know a bit more about it. thanks Quote Link to comment Share on other sites More sharing options...
deMideon Posted May 17, 2004 Share Posted May 17, 2004 Here is the window felt I used... cheap and easy to get!: http://www.jcwhitney.com > > The catalog item number for the part is 18GA-4874U. > > Now here's the tricky part. The letters in the catalog number can be > different depending on which issues of the JC Whitney catalog your looking > at. But if you call the order line and tell > the person you want part # 18-4874, you'll get the right stuff. It's > description is "Rubber Window Channel 9/16 " x 17/32 ". It comes in an 8-ft. > piece. Which is almost enough to do > both sides, but not quite. So, you have to order 2 pieces. The price when I > ordered was $6.99 each. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.