zthis Posted July 9, 2004 Share Posted July 9, 2004 Will MT ET Street 26X10.5X15 on a 7inch Weld Drag Lite fit on a 75Z with Stock Suspension tires will only be used at the drag. Not sure what the back spacing is but there is 4 inches from the backside of the center hub to the lip of the rim Thanks Quote Link to comment Share on other sites More sharing options...
Doug71zt Posted July 9, 2004 Share Posted July 9, 2004 I run 26x9.5x16 QTP DOT with coilovers on my 240 and they are fairly tight in the wheelwell. You are trying to go 1 inch wider with stock springs. I don't think that they will go, but I have no proof that they won't fit. Maybe someone here's been down this road. Good luck, Eh! Doug Quote Link to comment Share on other sites More sharing options...
Guest Phil1934 Posted July 10, 2004 Share Posted July 10, 2004 M/T recommends a 8.5" rim so that's against you. I did see M/T's on a Z at a SE Z drags but did not get into specifics like coil overs, etc. I'm looking at their Indy S/S tire, a G60 (1/2" taller and .4" more tread than 235) for a 6"-8" rim. Quote Link to comment Share on other sites More sharing options...
Drftn280zxt Posted July 11, 2004 Share Posted July 11, 2004 Thats 3.5" of backspacing if I'm not mistaken. On a seven inch wheel the entire rim (bead to bead is 8") (.5" of space for each bead) Subtract .5" from the four inch you measured and walla 3.5" of backspacing. Plus take into account the thickness of the metal on the hub of the wheel (probably .5") giving you a centerline wheel ("0" offset) I'm not sure how your going to fit that tire on the wheel, its 2.5" wider than the entire wheel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.