Jump to content
HybridZ

I am starting 280z/350 sbc project


Recommended Posts

The engine needs to be the SAME year of the car or NEWER with ALL of the smog equipment installed. 260Z's, 280Z's, and all later models require this. However, if the car is a 240Z a smog check is no longer required, but keep in mind they don't expect the car to have a V8 either. If you can afford it, put a stock V8 in a 240Z, legally register the car with the smog legal motor, and then after getting the door jam plate from the State, take all the smog stuff off and modify the poop out of the motor. Since you have a 280Z already, work with that instead---the upside is that they have 'frame rails' extending to the back of the car and feel more refined on the highway. A smog legal swap can be done rather easily, but again, make sure that the motor you are installing is the same year as the car or newer then the car. JTR also makes a TBI/TPI swap manual. smile.gif

 

Buy the JTR manual: JTR

 

Hope this helps. If the 'search' function on the forum is working, spend weeks reading all the posts. I'm sure that 90% of what you ask is already hashed out 10 fold.

 

Good luck,

 

Davy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...