Zoldman Posted August 27, 2004 Share Posted August 27, 2004 All, I'm working over my '95 LT1 engine/trans, and got to thinking about wiring and such. My biggest question is where to mount the PCM/ECU; in the engine bay or inside the vehicle. My unit is engine bay rated; it came out of a '95 Z28 Camaro. My car is a '74 260. Any thoughts? Thanks Bill Quote Link to comment Share on other sites More sharing options...
mark Posted August 27, 2004 Share Posted August 27, 2004 I mounted mine in the car on the passengers side just in front of the door hinges in the foot well. Kept stock lengths of the harness wiring. Hope that helps. Quote Link to comment Share on other sites More sharing options...
Tim240z Posted August 27, 2004 Share Posted August 27, 2004 I am not running any HVAC equipment, so I mounted it on the tunnel behind where the controls for the heater in the center of the dash would be...... Quote Link to comment Share on other sites More sharing options...
VRJoe Posted August 28, 2004 Share Posted August 28, 2004 Since I moved the battery to the back of the car I mounted the ECU on the firewall were the battery used to sit. - Joe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.