SBC_400 Posted January 19, 2005 Share Posted January 19, 2005 ok, I need to know the wheel base form my 74 260, but my car and all the amnuals are at home, and I am at work. I searched the forums, and I had very little luck as well as on yahoo. I did come up with a number of 90.7" and I want to confirm if that is correct. I need this for the the building of my new chassis. and also if any one has the width measurement from the inside of the rocker to inside of the other rocker. thanks scott Quote Link to comment Share on other sites More sharing options...
Guest 240zJake Posted January 19, 2005 Share Posted January 19, 2005 IM looking at a frame diagram for a 240z an there are 2366.3 mm between shock towers which is 93.1614173 in Do not know if this is the wheel base number but I will dig out the mags and find out... Quote Link to comment Share on other sites More sharing options...
Guest 240zJake Posted January 19, 2005 Share Posted January 19, 2005 Alright I found the 1974 260z has a wheelbase of 90.7 in | 2303.8 mm. | 2.3 m. from two diffrent sources Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted January 20, 2005 Share Posted January 20, 2005 Mine measures 94 inches exactly with a tape, center of spindle to center of axle, however mine has a 9 inch ford rear so I'm not sure about it being exactly in the same place as a stock z. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.