hjc74260Z Posted March 7, 2005 Share Posted March 7, 2005 Does anyone have the dimensions for the strut spacer that goes between the strut mount insulator and the top spring perch on the rear struts for an early '74 260Z? I replaced my springs with Tokicos about nine years ago and just realized that the reason the rear fender lip sits about 0.75" lower than the front fender lip could be that I forgot to put them back. I plan to make some replacements, since I appear to have misplaced the originals. I'm guessing it is a donut. All I need are the inner and outer diameters. Thanks, Hubert Quote Link to comment Share on other sites More sharing options...
Guest Phil1934 Posted March 7, 2005 Share Posted March 7, 2005 I installed my Chevette springs yesterday in an early '74 260Z. All I had was the stamped metal spring holder and the large rubber bushing/mount. No bushing. I don't see how you could have anything there as the strut threads must stick through the bushing and there is not much extra. Quote Link to comment Share on other sites More sharing options...
BillZ260 Posted March 7, 2005 Share Posted March 7, 2005 I MAY have some that are sitting on the shelf, let me look tonight and I'll measure them. If they are usable thier yours but I doubt they are. Once again I am not sure if I still have them. Later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.