tsheldon Posted May 1, 2005 Share Posted May 1, 2005 I have searched all of postings and sites with the drawing of the Ron Tyler diff mount, and all seem to be missing one CRITICAL dimension....... Can anyone fill in the blank for the relative location of the 4 horizontal mounting hoels I see diam of the holes, but no referenced vertical location ... It seems that this is possibly the most critical dim as it will set pinion angle in the chassis. TIA Tim Quote Link to comment Share on other sites More sharing options...
jaime240z Posted May 1, 2005 Share Posted May 1, 2005 Does this pic help? http://us.f3.yahoofs.com/users/41bb0a64z9406f34b/e8e5/__sr_/9917.jpg?phylTdCBTGfHzCyv I believe the 4 holes your are referring to bolt up on the car where the oem strap mounts to ..... Quote Link to comment Share on other sites More sharing options...
CruxGNZ Posted May 1, 2005 Share Posted May 1, 2005 The pinion angle can be adjusted with washers for your vehicle. That aside, the drawing does show where the holes are located. The "ears" that come off the bottom are 1 inch wide. The holes are located in the center of those "ears" when viewed from the side. !M! Quote Link to comment Share on other sites More sharing options...
tsheldon Posted May 2, 2005 Author Share Posted May 2, 2005 Thanks for the feedbac..... I figured it was supposed to be centered in the 1" plate, but better to ask before fab rather than remaking the part later Tim Quote Link to comment Share on other sites More sharing options...
EvilRufusKay Posted May 2, 2005 Share Posted May 2, 2005 Tim, Let us know the hours / cost to make this yourself please. I am getting ready to build mine and was weighing fabbing it myself, or farming it to my local machine shop. Thanks! Rufus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.