Guest ON3GO Posted June 1, 2005 Share Posted June 1, 2005 guys will a 15x7.5 all the way around +4 offset for the front and a +6 offset work on a 280Z with stock fenders and just some custom lowering springs? need to act fast to get theses wheels if they fit... hope they do. mike Quote Link to comment Share on other sites More sharing options...
Phantom Posted June 1, 2005 Share Posted June 1, 2005 Depends on the springs. A coil over set-up will allow that to work fine with maybe a larger positive offset. Wheel will clear the assembly. If you are at stock diameter springs you may be limited on tire width. 7" wide wheels with +5-8mm offset will work fine for up to 225 width but not lowered. Lowered, that extra 1/2" of wheel will probably limit you to a 215 because it moves the tire centerline back out 6+ mm. Quote Link to comment Share on other sites More sharing options...
Guest ON3GO Posted June 2, 2005 Share Posted June 2, 2005 ya i no a coilover will allow me to run pretty much whatever wheel i want but i dont have them on this car yet. i would like to run a 195 up front and a 215 out back or 225's. Austin who had theses same springs on his car ran zero offset 16x8's with 225s and never had a problem mike Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted June 4, 2005 Share Posted June 4, 2005 I think they would rub man my 14x6 panas with 215 on then cleared but only because the tire was below the spring perch, the 15's would put the wheel and tire up higher I think it would rub the spring. I believe the panas were a 10 or 12+ offset. -Ed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.