Mikelly Posted June 3, 2005 Share Posted June 3, 2005 Guys, I took some pics of Jim's car today with the SuperiorAirflow Adapter and piping for the Ram Air kit we put together for his car. I'm ordering mine over the weekend... Check the pics out Here: http://photos.yahoo.com/dat74z They are located in Jim's folder (Red 240Z)! The shop had installed a 3 inch exhaust which in theory will work, but was a let down when I saw some of the welds and the creased pipe from a NON-mandrel bender. The car is going to have to be raised up a hair due to ground clearance! And they decided to go with some AZCar camber plates! Mike Quote Link to comment Share on other sites More sharing options...
Psykovertible Posted June 4, 2005 Share Posted June 4, 2005 looks good. looks taller than i expected. figured on a more low-profile fitment. looks sharp with the color matched silicone couplers on the intake piping. Quote Link to comment Share on other sites More sharing options...
Mikelly Posted June 4, 2005 Author Share Posted June 4, 2005 It does clear the hood, fortunately. It was close though... Jim isn't a fan of the look, in facor of a more traditional carb air cleaner, but I explained the benefits of getting as much cold air as possible into it. He's again trusting my judgement! MIke Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.