PapaSmurf Posted June 20, 2005 Share Posted June 20, 2005 hey guys I finally got around to replacing the bad brake line that's kept my rear brakes from working I replaced the front rotors with drilled and slotted ones and new pads etc and I bled them just fine but on the rear's I cant find the bleeder valve. On the front calipers there was a valve that you turned to open and then you get somebody to stomp the pedal and the fluid/air came out of it but on the drums I can find nothing like that... anybody have the solution? It's probably ridiculously obvious and I'm going to feel rather stupid for it I know but I appreciate it Quote Link to comment Share on other sites More sharing options...
blueovalz Posted June 20, 2005 Share Posted June 20, 2005 It's been decades since I've bled drums, but I believe the bleeder is on the back side of the cylinder (back side of drum just above the axle). Get a flashlight and look...it will be back there somewhere. Quote Link to comment Share on other sites More sharing options...
innerware Posted June 20, 2005 Share Posted June 20, 2005 yeah it can be a pain in the ***. But it is directly behind the cylinder at the back of the drum. Quote Link to comment Share on other sites More sharing options...
PapaSmurf Posted June 21, 2005 Author Share Posted June 21, 2005 thanks a million guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.