Guest iskone Posted July 15, 2005 Share Posted July 15, 2005 I've read somewhere that using the stock ZX module w/ an ignition box would fry the module. I've also read it can be piggy backed, but not how it can be done. I couldn't find the specific info by searching. Got a link? I have a XR300 and blaster coil. I intend to run a ZX dizzy w/ an E12-80 module and w/o vaccum. Got one for sale? BTW Who has used Magnacore Wires? Isk Quote Link to comment Share on other sites More sharing options...
JMortensen Posted July 15, 2005 Share Posted July 15, 2005 I used to have my MSD hooked up with the module, then I realized that there is no reason to so I removed the module from the circuit. I ran it that way for a couple years, no damage to the module at all. I imagine that it would be the same with the Crane. Since there is no reason to run the module, don't. It's just one more part that can fail. When I worked as a Porsche mechanic Magnacors were the only wires we used on our customers' cars. Quote Link to comment Share on other sites More sharing options...
Guest iskone Posted July 15, 2005 Share Posted July 15, 2005 Since there is no reason to run the module, don't. It's just one more part that can fail. Good point. As long as there is enough spark I should be fine. Quote Link to comment Share on other sites More sharing options...
Guest iskone Posted July 15, 2005 Share Posted July 15, 2005 Thinking about it I realized with my my handed *** the less work the better so I'll just leave the XR300 in place. I'm still a little unclear bout wiring it in properly though. Isk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.