heavy85 Posted August 13, 2005 Share Posted August 13, 2005 Anyone got any pictures or advice how to mount a 16" Spal fan to the stock z radiator. I've got some ideas just wanted to see what others had already done. Also, any suggestions where to install the thernostat switch that controls the fan? I know it ideally should go in the return flow to the radiator but I dont have any extra holes in the engine to screw it into and it's kind of big (3/8 NPT). Thanks Cameron Quote Link to comment Share on other sites More sharing options...
Phyxius Posted August 13, 2005 Share Posted August 13, 2005 my thermostat housing has a couple plugs in it which i assume are covering extra holes. Does yours not have this? (I wouldn't know, because I've only seen my motor) Also, I've been considering getting rid of the TB line since I don't use the fast idle valve anymore anyway. That would provide an extra port if you were willing to sacrifice it. Quote Link to comment Share on other sites More sharing options...
heavy85 Posted August 13, 2005 Author Share Posted August 13, 2005 Unfortunately it's got a P79 head which only has one port on the thermostat housing and it's being used to measure temp for the gauge. I also have a P90 head that has several ports on the thermostat housing but unfortunately the housing will not fit the P79 head and I'm NOT switching heads. Any other ideas? Cameron Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.