slowspeed Posted October 1, 2005 Share Posted October 1, 2005 quick question does anyone have a p# for a good fuel pump relay?? I'm working on 73 240z,and planning to install a electric fuel pump.By the way the engine is rb26 engine.If that helps. Thanks Quote Link to comment Share on other sites More sharing options...
evildky Posted October 2, 2005 Share Posted October 2, 2005 any standard 5pin automotive relay will work fine unless your running some god awefeul high amp pump Quote Link to comment Share on other sites More sharing options...
Dan Juday Posted October 2, 2005 Share Posted October 2, 2005 I've have had real good luck with GM junk yard relays. Nice quality piece. Find a late model FI car and check the firewall. You should find at least two or three per car. They come with a metal mounting bracket, are sealed units, and have nice water tight plugs. Make sure you cut the wires and get those too. Best part is you can get them for about a buck each. Quote Link to comment Share on other sites More sharing options...
ezzzzzzz Posted October 3, 2005 Share Posted October 3, 2005 I run the GM relays too. Always run a good heavy wire for the pump 12V and ground. Mounting the relay in the rear of the car and using 10 gauge wire will provide all the amperage the pump will need. You can run the power lead inside the car following the factory harness and then exit to the pump location with a grommet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.