DAT240Z Posted February 20, 2006 Share Posted February 20, 2006 I'm in the process of converting my 240zt to megasqurit. What I need to know is what have you guy used to connect the air filter to the turbo, as I would like to get rid of the stock rubber boot. Also if you have pictures of you set up please post it. Thanks Quote Link to comment Share on other sites More sharing options...
mobythevan Posted February 20, 2006 Share Posted February 20, 2006 here was my setup using a piece of 3" pipe with a slight bend on the end Quote Link to comment Share on other sites More sharing options...
DAT240Z Posted February 20, 2006 Author Share Posted February 20, 2006 Thanks Quote Link to comment Share on other sites More sharing options...
mobythevan Posted February 21, 2006 Share Posted February 21, 2006 you could continue on out the front through the radiator support for better cold air intake, but my air filter was right behind the hole in the support so I think it worked ok. Quote Link to comment Share on other sites More sharing options...
mario_82_ZXT Posted February 21, 2006 Share Posted February 21, 2006 I believe I plugged all the hose on the rubber boot then used a 90 deg bend to put it right behind the headlight. With a heat shield (there is barely enough room for one) it's the next best thing so as not to cut the rad support. Mario Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.