Jump to content
HybridZ

DAT240Z

Members
  • Posts

    220
  • Joined

  • Last visited

Everything posted by DAT240Z

  1. I am looking for a 280zx turbo distributor and the gear If anyone has one for sale please send me a PM Thanks
  2. I am looking for a 280zx turbo distributor. If anyone has one for sale please send me a PM Thanks
  3. I'm looking to buy a 280zx turbo manifold, if anyone have one for sale. Please send PM $100
  4. I'm looking for a plug and play wiring and harness for my LS1 5.7 swapped 240z. Looking for recommendations on what brand guys are using . I have T56 transmission and stock ECU. Thanks
  5. Looking for a 280z intake manifold, preferably non EGR intake manifold but will consider an EGR manifold. Looking to spend up to $75 please send me APM if you have one
  6. The plan is to sell the Webbers to fund a to the EFI. I'm looking to get more information on a System first.. I am familiar with megasquairt, I had very bad experience with the that system. I was one of the first guys to buy from DYI autotune. My ECU had lot of firmware issues, lost and The injector drivers 3 times had to send the Box back for repair . After about 6 months of deal with that I rip the whole thing out and bought SEE. They sent my ECU to me with a base tune my car was a pleasure to drive after that I drove with the base Map for three years before ripping out the turbo set up and going to a LS1 swap. That was about 10 years ago. If you are to go to DYI auto tune website you will see a diagram for a wire in up the the Realy board. That illustration came from my friend Chris. The guy at Dee why I ordered talk liked the illustration and acts for permission to display it on his Web pace it has been up there ever since. I am sure my lack of skills what it come to Tuning, The firmware issues back than, And the Box heaven to be sent back 3 times for repair Had a lot to do with my experience with that system. MADKAW If you still have my number please give me a call when you get a chance if not I can PM my number to you again
  7. The plan is to sell the Webbers to fund a to the EFI. I'm looking to get more information on a System first.. I am familiar with megasquairt, I had very bad experience with the that system. I was one of the first guys to buy from DYI autotune. My ECU had lot of firmware issues, lost and The injector drivers 3 times had to send the Box back for repair . After about 6 months of deal with that I rip the whole thing out and bought SDS They sent my ECU to me with a base tune my car was a pleasure to drive after that I drove with the base Map for three years before ripping out the turbo set up and going to a LS1 swap. That was about 10 years ago. If you are to go to DYI auto tune website you will see a diagram for a wire in up the the Realy board. That illustration came from my friend Chris. The guy at DYI liked the illustration and asked for permission to display it on his Web page it has been up there ever since . I am sure things have improved megasquairt But I don't want to relive those days. I'm sure my lack of tuning skills had a big part to play in me 1st experience with that system. Also not having anyone in my area with experience with megasquairt .
  8. The plan is to sell the Webbers to fund a to the EFI. I'm looking to get more information on a System first.. I am familiar with megasquairt, I had very bad experience with the that system. I was one of the first guys to buy from DYI autotune. My ECU had lot of firmware issues, lost and The injector drivers 3 times had to send the Box back for repair . After about 6 months of deal with that I rip the whole thing out and bought SDS. They sent my ECU to me with a base tune my car was a pleasure to drive after that I drove with the base Map for three years before ripping out the turbo set up and going to a LS1 swap. That was about 10 years ago. If you are to go to DYI auto tune website you will see a diagram for a wire in up the the Realy board on a 280zx turbo swap.. That illustration came from my friend Chris. The guy at Dyiautotune liked the illustration and and for permission to display it on his Web page it has been up there ever since. I believe the combination of my Box being one of the 1st he built for 280zx and also my lack of tuning skills cost a lot of my issues way back in the day. Although I'm sure by now things are much better with Mega squirt I really want to with a plug and play system . Don't want a repeat of those days of not knowing what I was doing no one close by that could help me having to go to the megasquairt Forum . Madkaw Do you still have my number if so can you please call when get a chance. I can PM you my number again if you don't have it.
  9. I'm not gonna be keeping the carburetors I will be removeing them and installing the EFI. And yes Fuel only going to run my 280zx distributor. My lack of Weber tuning skills and no weber suport in my area are the main reasons I want to replace the fuel system with bsomething simple that doesn't require a lot of tuning .
  10. Looking for any feedback on the Zcardepot Fast EFI. For I have a 240Z with an L28 bored .20 over N42 port and polished head, running a Robello street cam,running triple Weber 45's. I have been trying to get the Webbers dial in runs good just get cant rid of the flat spot at 3000k RPMS. Cruising on the highway 70 MPH the car hunts and runs flat. Runs Great at 3300 RPMS and above. But at those RPMS I speeding. Im looking to swap over the the Fast ERI. Eventually Im looking to buy Robello 's 3.0 bottom kit. IF there's anyone running this set up pleae post your experience with the product. https://zcardepot.com/fuel-injection-retrofit-kit-fast-efi-280z-280zx.html
  11. I am looking to buy a set of red Tokico lowering Springs for my 240Z. Please send PM if you have a set to sell
  12. I sent you a PM with my phone number. There's something wrong with my account I have to reset my Password to log in every time.
  13. Hi John I will take the brace I couldn't login onto the.site for a few day's . Must have gotten locked out due to too many attempts. I had forgotten my password . Please let me know if you still have it. Zip code for shipping 46783
  14. Looking for a set of front and rear strut tower brace for mot 240z Please PM me if you have a set to sell Thanks
  15. I'm looking for a good working 280zx NA Distributor. Please send PM if you have one to sell and asking price Thanks
  16. Looking for a good turn signal switch for a 240z . Please PM me if you have one to sell
  17. Pcressey, have you resolve your spring issue. If so can you please let me know what you did. Im in the market for new springs for my 240z Thanks
  18. I'm looking for a a R180 differential Flang for my Subaru conversion. Please let me know if you have one.
  19. Hey Guys I have found the cause of the rattling sound on the car. It's coming from the driveshaft flang that bolts to the differential. Under hard acceleration the flange is hitting the Ebrake mechanism. I took the driveshaft out and the Ebrake mechanism, straighten the Ebrake bracket replace them and the driveshaft still hits the bracket. Any ideas. If all else fails I am contemplating moving to a brake system it doesn't work anyway. When I got the car it did not have the differential . I've never had an issue with the drive shaft and e-brake mechanism until I did the swap. Do you guys recommend get a new strap and try that I'm not sure how much power or Torque this new engine makes over the stock engine. I did install a new stock diff. Mount when I did the swap
  20. A little update on the car. I reinstalled the diff. Yesterday wiggle the clutch Fork around a little bit adjusted the clutch little the car now Drive and reverse under load.I was able to back out of the garage and drive down the street. The bad news is theres a noise coming from the rear it's hard to describe but it seems like there's something back there that's it slipping. It doesn't do it all the time but enough to prevent me from putting the car on the road when it happens it seems like some gear or something and spinning and the car will stall whatever is stripped would catch again and the car will then start to roll again. I remove both halfshafts and spun them they both spun smoothly as did the flange. I did not remove the flange I wanted to verify before removing the flange to check and see if I had a possible broken stub axles .Is possible to have a broken stub axle if the flang would still spin. I try to pull on the stub axles and the Flang the see if there was something lose as well,nothing.
×
×
  • Create New...