OlderThanMe Posted March 6, 2006 Share Posted March 6, 2006 Right now I am in the middle of building a new Dash for my early 74 260 out of .063 aluminium at my welding school that I am almost done with. right now I am just playing with ideas of what it should look like but the main attachment points of the grame are about half way done. I am thinking of having the top flat with a downward 180* bend with a .75in radius. and the face being recessed a little bit behind the end of the top piece. I'll post some pics tonight of my 4'x8' piece of aluminium and some drawings of my idea. I am also going to make a center console to match. Quote Link to comment Share on other sites More sharing options...
johnc Posted March 7, 2006 Share Posted March 7, 2006 I strongly suggest you make the dash easily removable and removable in sections. It helps considerably with wiring and chasing down problems. To keep rattles down use 1 or 2" wide strips of .012" thick 3M Scotchcal film everywhere two panels meet, overlap, or where the dash is mounted to the car. Quote Link to comment Share on other sites More sharing options...
Some-Guy Posted March 18, 2006 Share Posted March 18, 2006 pics pics pics please! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.