Owen Posted April 5, 2006 Share Posted April 5, 2006 This is a manifold for a rotary engine, but I'm interested in who the hoses are connected to the injectors. It looks like a there's a center plate with a hole in it that clamps the hoses down onto the injectors . I'm talking about the center mounting bolt, as that tightens down, what looks to be AN fittings are pushed onto the injectors. I'm trying to come up with a way to mount American top-feed injectors onto my Z32 engine. Those damn side feeds are expensive! OWEN Quote Link to comment Share on other sites More sharing options...
Owen Posted April 5, 2006 Author Share Posted April 5, 2006 Must be similar to this http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FUL-013&Category_Code=FUL Quote Link to comment Share on other sites More sharing options...
johnc Posted April 5, 2006 Share Posted April 5, 2006 The aluminum "fittings" on top of the injectors appear to be machined square blocks that are part of the plate that's bolted down, holding the injectors in place. The blocks probably have a hole on the bottom the fits over the top of the o-ring injectors and AN fittings project out of the top of the plate. I used something similar from Pro-Jay when putting a turbo 13B engine into an RX8. BTW... Keith at KG Parts is a good person to work with. Quote Link to comment Share on other sites More sharing options...
Owen Posted April 6, 2006 Author Share Posted April 6, 2006 Thanks, I'll shoot him an email or something. So how's that RX8 doing, I only saw it when it was up in the air on your lift. Owen Quote Link to comment Share on other sites More sharing options...
Owen Posted April 6, 2006 Author Share Posted April 6, 2006 Speak of the devil, lookie what I found. http://www.rx7club.com/showthread.php?t=517091 I didn't know your name was hakeem??? Quote Link to comment Share on other sites More sharing options...
johnc Posted April 6, 2006 Share Posted April 6, 2006 "Pay no attention to the man behind the curtain..." RX8 is over with Jeff at Mazda Power getting the engine built. My work is done (for now). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.