Nismo280zEd Posted April 26, 2006 Share Posted April 26, 2006 ok so MS uses GM style sensors, for ease of replacement. How come trying to find a part number is so hard then? I managed to find the sealed style water/air temp sensor... #DETS10138 but what is the code for the open element sytle? anybody know? -Ed Edit.. found it #SIAX34 & #SIAX1 & #SIATS13 These codes were found off a 90 transam, i'm sure there are cheaper ones. Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted April 26, 2006 Share Posted April 26, 2006 MSD has some, you can get them from Summit. Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted April 26, 2006 Author Share Posted April 26, 2006 cheaper than 20 w/ tax? I was going to try and get one from O'Reillys so it had a lifetime warranty on it. -Ed Quote Link to comment Share on other sites More sharing options...
mobythevan Posted April 26, 2006 Share Posted April 26, 2006 Megasquirt manual has all the part number info Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted April 26, 2006 Author Share Posted April 26, 2006 Megasquirt manual has all the part number info my bad Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted April 26, 2006 Share Posted April 26, 2006 cheaper than 20 w/ tax? I was going to try and get one from O'Reillys so it had a lifetime warranty on it. -Ed I believe it was about 20 shipped to my door from summit, for the air temp and water temp sensors. That's including the 8 dollar summit fee. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted April 26, 2006 Share Posted April 26, 2006 my bad no problem, I am always amazed when I look at the manual, it is continually updated, those guys do a good job with documentation. Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted April 26, 2006 Author Share Posted April 26, 2006 I haven't looked over in a while... I guess i need to go check it out again. Browsed through the summit catalog this morning didn't see them... did you find them on the website? -Ed Quote Link to comment Share on other sites More sharing options...
z-ya Posted April 27, 2006 Share Posted April 27, 2006 I still wish they would integrate all the documentation into a printable PDF file. Printing all those html files is a pain. They had one a while back, but it has dissapeared. I have an old 2003 copy if anyone needs it. Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted April 27, 2006 Author Share Posted April 27, 2006 I still wish they would integrate all the documentation into a printable PDF file. Printing all those html files is a pain. They had one a while back, but it has dissapeared. I have an old 2003 copy if anyone needs it. I couldn't agree more, I'd still like a copy of the 2003 pdf as i'm sure all the sensor part numbers are the same and the principals etc don't change that much. -Ed EDIT: I just got off the phone with O'Reillys Auto Parts, and the part # for the open element temperature sensor is WT382 < Quote Link to comment Share on other sites More sharing options...
z-ya Posted April 27, 2006 Share Posted April 27, 2006 Ed, PM me your email address, and I'll send you the PDF manual I have from 2003. Pete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.