DAT240Z Posted April 30, 2006 Share Posted April 30, 2006 Well I have been installing my megasuqirt over the passed couple weekends. Yesterday I got the ECU. installed and check the unit to see if the relay board would turn the fuel pump on for a few seconds, which it did. I turn the engine over to check for spark, nothing the coil would not fire. I have the 3.0 board which was build by DYI. I though I would have to turn the spark control when I hook up the laptop for tuning, so today I installed the wide band and turn the key on to calibrate it when notice the fuel pump was not coming on anymore. I checked for 12 v at the pump and nothing, I check for 12 v at the coil and it too is dead just like last night. When I turn the key the ECU powers up and I hear the fuel pump relay come on and switch off after a few seconds. I still have not hooked up the laptop to the ECU yet as I run out of time to keep working on the car. Does anyone have an idea of where I should start? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.