Ruben Posted January 25, 2001 Share Posted January 25, 2001 Mike, I'll ship one out to you tomorrow. I paid $43.46 ea. plus shipping $6.42, total $93.34. E-mail me your shipping address or post it here. Ruben Quote Link to comment Share on other sites More sharing options...
zgeezer Posted January 25, 2001 Share Posted January 25, 2001 quote: Originally posted by spotfitz: Danno, The OD of the ZX rotor is 10 5/32" I have 2 brand new sitting in the garage along with the '82-'83 ZX calipers(from a yard), which is why I will have to have this offset bracket one way or another. I am going to go by that yard with the '81 tomorrow. I'm going to see if I can take off early to do it. I'll probably just pull the whole control arm off each side. I think it would be faster. I would still like to talk with someone that has done this conversion. I know about the write up on IdealZ, but who did it to there car and where did they get their brackets? That bracket looks to be the right one. I am almost tempted at this point to get the whole control arm off each side of one of these weld on Maximas and start grinding. It appears just the OD of the housing is bead welded to the bracket. I could then drill the holes for the bolt up next door to where I work. Someone else have some info? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.