datman Posted July 28, 2006 Share Posted July 28, 2006 got a few things left to do but its looking good! http://www.zclub.net/forum/attachment.php?attachmentid=2096&d=1154118148 http://www.zclub.net/forum/showthread.php?t=7411&page=2&highlight=wheels Quote Link to comment Share on other sites More sharing options...
JMortensen Posted July 28, 2006 Share Posted July 28, 2006 First link doesn't work if you're not a member. Comment on the 2nd one. I watched the video and you could hear the wheel scraping, but you couldn't tell on what. There was also some mention of the holes being misaligned. Holes misaligned is pretty bad and I'm glad to hear the wheel manufacturer seems to be standing behind his product, but as far as the grinding I'd be marking the stub axle and the outer edge of the rim and turning the wheel around and seeing where it grinds. If it grinds on the same place relative to the stub axle then it could be bent. Not terribly uncommon for someone to get in a very minor collision and bend a stub axle. Grinding on the same place on the wheel would tend to indicate a bent wheel. Quote Link to comment Share on other sites More sharing options...
datman Posted July 29, 2006 Author Share Posted July 29, 2006 yes i tried different wheels on the same hub and they were fine. seems the holes are slightly off centre. Here is the picture of the car that you couldn't see how do you get the pictures to appear full size in the message window? Quote Link to comment Share on other sites More sharing options...
datman Posted July 29, 2006 Author Share Posted July 29, 2006 in order to upload the picture It had to be no more tha 97kb which is why its so poor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.