jeremy7688 Posted September 17, 2006 Share Posted September 17, 2006 What is the best way to separate the hub from the rotor? I have tried using heat and the the hammer but still wont come apart. I think they have rusted together. Where can I buy new hubs? Quote Link to comment Share on other sites More sharing options...
JMortensen Posted September 17, 2006 Share Posted September 17, 2006 I have a couple sets of 240 hubs if that's what you need. The 240 and 280 hubs are different. One set has standard lugs, the other has longer 12 x 1.5 lugs. PM me if your interested. I haven't come across one that really wouldn't separate. I suppose if I did I'd set it in a vise so that it was resting on the rotor surface then I'd drive the hub out with a piece of wood and a BFH. Quote Link to comment Share on other sites More sharing options...
jeremy7688 Posted September 17, 2006 Author Share Posted September 17, 2006 I have tried everthing nothing works any ideas anyone? Quote Link to comment Share on other sites More sharing options...
gearheadstik Posted September 17, 2006 Share Posted September 17, 2006 Put them under a press with the rotor resting on your press plates..lay something on the top where you will press against not to damage the hub..I've done several sets like his off old rusty parts cars...works great Quote Link to comment Share on other sites More sharing options...
jeremy7688 Posted September 17, 2006 Author Share Posted September 17, 2006 cool thanks for the tips. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.