wecvusmc Posted September 26, 2006 Share Posted September 26, 2006 I am installing a e11v2 in my 76 turbo swap. I have installed the wiring and I am ready to start setting up my ECU, but I can't connect to it. I have done the basic checks such as making sure the ECU has power and com ports are set on the correct settings. I am using a serial to usb adapter that I know works because it works without a hitch with my wideband (com port 1). The wideband is getting power from the ECU. I have the settings in halwin set to com port one and the usb serial adapter to com port one. I have also tried three other com ports (2-4) with no avail. I have also tried using a friends computer but that doesn't work either. Am i missing something here? Or is it possible that I have somehow gotten a bad ECU. Thanks for your input. Quote Link to comment Share on other sites More sharing options...
cobraz240z Posted September 26, 2006 Share Posted September 26, 2006 Try disconecting the wide band Quote Link to comment Share on other sites More sharing options...
Sparky Posted September 27, 2006 Share Posted September 27, 2006 Have you tried changing the latency of the USB to seriel adapter? I cannot recal the exact figure but I know alot of people have had to do this to get the Haltech systems working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.