HarrisonTX Posted May 20, 2007 Share Posted May 20, 2007 Hey guys, i would like to run a blowproof bellhousing. Anyone running one? not too many options on lakewoods, anyone run the 15020? its for a hydralic application, but im affraid the mounting parts for the hyd. setup will be too low. Any help? Quote Link to comment Share on other sites More sharing options...
pparaska Posted May 21, 2007 Share Posted May 21, 2007 For a Gen I SBC, here's some info on the blowproof bellhousing I'm using and the hydraulic TO bearing for it: http://forums.hybridz.org/showpost.php?p=613577&postcount=21 Not cheap! Quote Link to comment Share on other sites More sharing options...
lbhsbZ Posted May 22, 2007 Share Posted May 22, 2007 I'm running the McLeod bellhousing that I got from Speedwaymotors.com. I had to do a little trimming to make it clear my longtube headers, but it clears the firewall fine with the scarab setup. I also used the pull type slave cylinder and it works well. Quote Link to comment Share on other sites More sharing options...
Pyro Posted May 25, 2007 Share Posted May 25, 2007 I used a regular lakewood but had to cut the entire bottom lip off for exhaust and ground clearance. Of course it doesn't pass NHRA spec anymore with the bottom lips cut off but I'm sure it will stop clutch parts from coming up into the car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.