Guest KraZ4spd Posted July 10, 2002 Share Posted July 10, 2002 Can I exchange my 240 front hubs with a 280zx(79-83)? Just curious. It would make my options better. Quote Link to comment Share on other sites More sharing options...
Mike C Posted July 10, 2002 Share Posted July 10, 2002 I believe that most Z hubs will fit the spindles, but the spacing is different which will affect which rotors you have to use in order to center on the caliper. Quote Link to comment Share on other sites More sharing options...
Guest KraZ4spd Posted July 10, 2002 Share Posted July 10, 2002 I had two bolts break off in one of my front hubs. Just wanted to know what my options are at the salvage yard. Quote Link to comment Share on other sites More sharing options...
Guest scca Posted July 11, 2002 Share Posted July 11, 2002 zx hubs fit the bearing but NOT the rotor-- offsets are different for hats Quote Link to comment Share on other sites More sharing options...
Modern Motorsports Ltd Posted July 11, 2002 Share Posted July 11, 2002 Originally posted by Nemeziz:I had two bolts break off in one of my front hubs. Just wanted to know what my options are at the salvage yard. I'd stick with the 240 or 280 hubs while you're 4lug...you could try heating up the sheared bolts and soaking in penetrating oil. Then an extractor or a left hand drill bit would be my next step....make sure you start with a small bit and a good centre as those bolts are well made and you don't want to wander into the hub metal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.