Guest fast95orange Posted July 8, 2007 Share Posted July 8, 2007 I have a 383 lt4 motor that i am building. A stock LT1 came externally balanced. However, my new engine is internally balanced. Does anyone know where I can get a steel flywheel for this application. I am in the 500-600hp range. It is for a T56 tranny. 153tooth, 11" diam, 1 piece rear main seal. Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted July 8, 2007 Share Posted July 8, 2007 You have two options. My engine machine shop would neutral balance your existing flywheel if you have one. Or you can buy an aftermarket piece from makers like McCloud and others. If you don't see what your looking for call them and they will neutral balance one for you. Quote Link to comment Share on other sites More sharing options...
bodie Posted July 9, 2007 Share Posted July 9, 2007 if you motor is a one piece and internally balanced then you should be able to use the stock lt1 flywheel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.